Arofanatics Fish Talk Forums  

Go Back   Arofanatics Fish Talk Forums > Arowana Forum > Arowana Discussion > Articles, Resources & FAQs

 
 
Thread Tools Display Modes
Old 17-07-2007, 10:41 PM   #1
rumraisin
Guest
 
Posts: n/a
Thumbs up I've got the solution to Curing GILL Curl WITHOUT Medication or Surgery

a little disclaimer first:

this idea of introducing a topic via "I've got the solution to..." is not mine to begin with. it should be credited to bro Kalimantan or to his predecessor who has used it beforehand. however, you could give me full credit for being inspired to COPY this method in drawing the readers' attention to a topic!

my intentions are clear. to share what i know on this particular topic; to arouse the readers' interest into a constructive discussion; and/or to procure a better or more applicable solution if any exists.

it would be presumptuous for me to say what i'm about to share would be THE only solution so the title should really be "I've got A solution..." rather than "I've got THE solution...", but for the sake of sensationalizing a topic i leave it as-is.

CURING GILL CURLS:

this method of curing gill curls with NO medication or operation should be credited to the shifu who has taught me this many years ago back in the US of A... he told me it was a well-guarded secret among pros. when clients bring in their aros (yes, the shifu was a LFS owner),this is the method the shifu would charge a fee for, in curing or straightening the afflicted gills. i had to bribe him w/ God knows how many HaiNan Chicken Rice before he let me in on the secret but you'll get it here for free!

i was very persistent in learning the secret method becoz many of my aros were afflicted with gill curls back then. this is due to poor water condition in the States; improper water management; using activated carbon and not changing them on time, etc. a more simple & responsible way of explanation is becoz i was inexperience and ignorant! so what causes gill curls? many factors but water quality is paramount reason. i won't go into too much on the cause of gill curls becoz this thread is about the 'solution' to curing gill curls. if however you keep your water parameter in check and consistent, you'll pretty much will never have to use the 'solution'!

prior to learning the method, i've done 2 or 3 operations of using X-acto knife & scissors to cut off the curled gill membranes. they grow back out but never like the original. using the following non-cutting method the gills will healed to almost a case of non-incidence. the method however will only work for aros with gill curl in the early stage. what's consider early stage? that's when the curl has only afflicted the soft membrane of the gill and has not yet gone to the hard plate portion of the gill. if it has gone to the hard plate, this solution may not be applicable.

Procedure

1. age new water (70-80% of tank's volume) this is the amount of old water you take out and need to be replaced after completing "operation". the new water is the means to correct the poor water condition which had caused the gill curls, but changes should not be drastic. i.e. old water temp 30 then new water temp should also be around 30, etc.

2. the water level now should be just high enough for the aro to swim in comfortably but not high enough for it to make a high leap. make sure you have clean hands and then put one hand in the water to let your aro feel comfortable about your presence.

3. gently, i stress GENTLY, but firmly chase after the aro with your hand to make it swim back & forth the length of the aquarium without scaring or frightening it.

4. continue the chasing process until the aro is completely exhausted. you will know this when it starts to swim unevenly, losing its equilibrium, allowing you to touch it without a fight. it may even lie on its side... don't fret, it's only temporary. it is now ready for the next step.

5. you may or may not need both hands for this part, depending on the size of your aro. grasp the aro firmly and start to massage the curled gill membrane with your thumb or whichever finger you feel comfortable.

6. keep on massaging the curled membrane until the soft part has begun to turn completely flimsy. no predetermined amt of time becoz size & condition of each aro is different, just have to observe carefully.

7. refill new water into tank. fill it slower if new water parameter is very different from the tank's water. keep an airstone with heavier than usual aeration until fish comes around to it.

8. add a powerhead if u don't already have one. the gill membrane in its healing phase look dark & almost deteriated, but it will grow back nicely.

This method may not work if what caused the gill curl in the 1st place has not been corrected. for me, i've sucessfully done 4 operations using this method. 2 on my aros and 2 for friends. i've also used step 3 & 4 above for other operations such as plucking a couple of bad scales, removing anchor worms, and trimming broken fins.

all info here are expressed for educational and discussion purposes. i do not recommend newbies or the faint-hearted to conduct the aforementioned.

cheers!
 
Old 17-07-2007, 10:52 PM   #2
WATARI"18
Guest
 
Posts: n/a
Default

bro a qtns from u? u mention massage..how to massage at the gills part?
 
Old 17-07-2007, 11:00 PM   #3
rumraisin
Guest
 
Posts: n/a
Default

Quote:
Originally Posted by WATARI"18 View Post
bro a qtns from u? u mention massage..how to massage at the gills part?
bro watari"18, u use a rubbing motion going up & down the outside surface on the soft membrane. keep on repeating this motion with light medium tension. don't rub too hard lest u may damage the membrane.
 
Old 17-07-2007, 11:27 PM   #4
WATARI"18
Guest
 
Posts: n/a
Default

oicc..quite diffcult,is not ez to do it. 1 hand hold aro another hand rub gently on aro gills membrance..
 
Old 17-07-2007, 11:34 PM   #5
rumraisin
Guest
 
Posts: n/a
Default

Quote:
Originally Posted by WATARI"18 View Post
oicc..quite diffcult,is not ez to do it. 1 hand hold aro another hand rub gently on aro gills membrance..
at first i thought so too! that's why u have to exhaust the aro to the point where it will have minimum movement & without any resistance. then it becomes easy w/ practice. i've done it with using just one hand on a 9" aro before!
 
Old 17-07-2007, 11:37 PM   #6
WATARI"18
Guest
 
Posts: n/a
Default

erhh..9" aro if those big aro,more diffcult..bro
 
Old 17-07-2007, 11:35 PM   #7
Tomatensosse200
Guest
 
Posts: n/a
Default

Great info! Thanks a ton for sharing!!!
 
Old 17-07-2007, 11:39 PM   #8
rumraisin
Guest
 
Posts: n/a
Default

Quote:
Originally Posted by Tomatensosse200 View Post
Great info! Thanks a ton for sharing!!!
Thank you for reading it!
 
Old 17-07-2007, 10:59 PM   #9
rumraisin
Guest
 
Posts: n/a
Default

forgot to add:

after the OP, use a water conditioner that helps form protective slime coating. your aro will need it after all the handling! back then i use NovAqua with quick healing results.
 
Old 18-07-2007, 09:00 AM   #10
el993
Guest
 
Posts: n/a
Default

Quote:
Originally Posted by rumraisin View Post
a little disclaimer first:

this idea of introducing a topic via "I've got the solution to..." is not mine to begin with......
Excellent info bro you contribute here! Let this "I've got the solution to..." carry on
 
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +9. The time now is 02:41 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright © 2000-2008 Arofanatics.com (Since 30th August 2000)