AquaZonic AirAid AC/DC Air Pump. Up to 15 hours of back-up air supply!

[Qian Hu]

We all know how much a nightmare power failures can be for all fish-keepers. When electricity stops, your filter stops running too. In extended power failures, dissolved oxygen can drop to dangerous and often fatal levels.

AquaZonic AirAid AC/DC Air Pump is designed for you to guard against such unforeseeable events. Usable as a normal air pump, the AirAid AC/DC Air Pump switches to battery mode automatically during power failures to provide up to 15 hours of backup aeration.

Protect your aquarium today against the unexpected! For more information, click here.


Features

• AC/DC powered. Functions as a normal air pump but automatically switches to DC mode during a power failure.
• 15 hours of backup aeration.
• Energy saving Pulsing Mode that further increases battery life.
• Low noise, low vibration.
• Increases oxygen levels in your aquarium.
• Lithium-Ion battery.
• 2 available models. AirAid 120 (1 outlet) and AirAid 240 (2 outlet).

Application

• Provides aeration in aquarium.
• Provides back-up aeration during a power failure.
• Provides aeration during transportation of fishes.
• Outdoor use (e.g. fishing trips).

3 Operational Modes



1) On

Plugged in with Electrical Supply: Continuous aeration. Battery charging.
No Electrical Supply (e.g. Power Failure): Continuous aeration until battery is flat.

2) Off

Plugged in with Electrical Supply: No aeration. Battery charging.
No Electrical Supply (e.g. Power Failure): No aeration.

3) Pulse

Plugged in with Electrical Supply: Pulsing aeration. Battery charging.
No Electrical Supply (e.g. Power Failure): Pulsing aeration until battery is flat.


Technical Specifications

1) AirAid 120

Voltage: DC 5V
Power: 2W
Pressure: >0.014Mpa
Output/Outlet: 2L/min
Outlet(s): 1

2) AirAid 240

Voltage: DC 5V
Power: 4W
Pressure: >0.014Mpa
Output/Outlet: 2L/min
Outlet(s): 2


Instructions

1. When charging the battery for the first time, charge until the ‘Charge’ indicator-light turn ‘green’.
2. As your unit is charging, the ‘Charge’ indicator-light will be ‘red’. The indicator-light will turn ‘green’ when charging is completed.
3. The air pump can be used while it is being charged without damaging the battery.
4. In the event that the unit is not in use, the unit must still be charged once every 3 months to prolong the battery life.
5. To prolong the battery life, it is recommended to switch to the DC mode periodically (twice a month). The DC mode can be activated by removing the power supply cable and switching the unit to ‘ON’.