|
23-02-2005, 01:33 PM | #21 |
Guest
Posts: n/a
|
i concur
since u had invested quite abit in the equipment, why not get the CO2 cylinder instead? and to add to that, yours is a large tank in which a preferred choice will be cylinder CO2 rather then a DIY CO2 system as pointed out, it is lesser of a chore and there is consistent CO2 injection throughout (when using the solenoid regulators). the duration of using it till the next topup of it can be quite long depending on the usage and the topup is a meagre $15 do give the cylinder CO2 a serious consideration Last edited by |ceberg; 23-02-2005 at 01:39 PM. |
23-02-2005, 01:41 PM | #22 |
Guest
Posts: n/a
|
is ur tank 48 inches or 48 cm???
if its 48 inches, dun bother using diy or nutrafin co2... get a cylinder... i did that in the past, close to being not using any co2... |
23-02-2005, 03:38 PM | #23 |
Senior Dragon
Join Date: Oct 2003
Posts: 4,576
|
this is going to sound naggy..... but GET A CYLINDER!!!
seriously, the DIY co2 will do zilch for a 60G tank with sump. for a tank with sump, even when using cylinder co2, you will need to find ways to reduce surface agitation in order to reduce co2 loss. |
24-02-2005, 01:36 AM | #24 |
Guest
Posts: n/a
|
I will eventually buy a cylinder, but for the time being, I "have" to use a DIY. Financial reasons, . The cheapest I found for cylinder set here in Southern Cali is $300. I also looked at the "Carbo-Plus" co2 system, it is around $150. Any broz here know anything about that product? Thanks for all the help!
|
24-02-2005, 01:39 AM | #25 | |
Guest
Posts: n/a
|
Quote:
|
|
24-02-2005, 01:47 AM | #26 | |
Guest
Posts: n/a
|
Quote:
Why don't you try DIYing 3-5 bottles of diy yeast then connect it into one main tube. Should be good i think use a co2 reactor, you should get by fine. No point wasting $$ on nutrafin. it's the exact same thing for a much higher price |
|
24-02-2005, 02:06 AM | #27 | |
Guest
Posts: n/a
|
Quote:
|
|
24-02-2005, 02:12 AM | #28 | |
Senior Dragon
Join Date: Oct 2003
Posts: 4,576
|
Quote:
but i must say that's real expensive. as for the carbo-plus thingy, i'd say stick to your diy then get ur cylinder set. the carbo-plus system uses electrolysis to produce co2 from the carbon plates. co2 dissolved rate is inefficient and the carbon plates should be pretty pricey to replace too. some comments from users here http://www.aquaticquotient.com/phpBB...ight=carboplus |
|
24-02-2005, 11:06 AM | #29 | |
Guest
Posts: n/a
|
Quote:
This hobby is addictive ....once you start you cant stop. Currently i have 4 planted(shrimps), 1 aro com tank and 3 guppy tanks(4 styro foam boxes). Can u imagine the chores....every day(before work) lolz only the water change is tiring other than that its endless hours of enjoyment. Thats why i gave up DIY.....now my planted tanks is much more stable ....dont have to worry abt CO2 running out and dont need to test water parameter every week .... However my next worry is a power blackout.....if you are keeping live stocks in you 48 inch tank you can also start worrying abt blackouts too. Last edited by simcb; 24-02-2005 at 11:16 AM. |
|
24-02-2005, 03:24 PM | #30 | |
Guest
Posts: n/a
|
Quote:
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|