ehiem pro II problem - Page 2

tropic · 20-10-2010, 05:04 PM

I had the same problem before. I replace the gasket which lines the filter. Bought them at NA .Works well after that. Try test in bathroom so if leak easier to clean.

20-10-2010, 10:17 PM

Yup agreed with what Tropic sayd. Today I change the gasket of a 2228 due to water leaking from the side after that leaking problem slove.

03-12-2010, 06:36 PM

if problem still persists can send to QH for servicing. I was charged less than 20 to replace a fault part.

03-12-2010, 10:03 PM

if the canister have been left unuse for a very long time, the o ring and the rubber parts usually will harden and crack which doesnt provide the complete seal of the canister.

troyz · 04-12-2010, 05:17 PM

hi oikh, if your pro2 filter is leaking by the side ONLY...
you can go to C328 n buy just the o-ring n replace it..

20-10-2010, 05:04 PM	#11
tropic Arofanatic Join Date: Jul 2002 Posts: 254	I had the same problem before. I replace the gasket which lines the filter. Bought them at NA .Works well after that. Try test in bathroom so if leak easier to clean.

20-10-2010, 10:17 PM	#12
chilla18 Guest Posts: n/a	Yup agreed with what Tropic sayd. Today I change the gasket of a 2228 due to water leaking from the side after that leaking problem slove.

03-12-2010, 06:36 PM	#13
acc Guest Posts: n/a	if problem still persists can send to QH for servicing. I was charged less than 20 to replace a fault part.

03-12-2010, 10:03 PM	#14
oldrookiesjerem Guest Posts: n/a	if the canister have been left unuse for a very long time, the o ring and the rubber parts usually will harden and crack which doesnt provide the complete seal of the canister.

04-12-2010, 05:17 PM	#15
troyz Arofanatic Join Date: Feb 2006 Posts: 183	hi oikh, if your pro2 filter is leaking by the side ONLY... you can go to C328 n buy just the o-ring n replace it..

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)