Laying Acrylic as Tank Base - Page 3

Flairtender · 24-05-2013, 11:25 PM

This is just for ur reference , no need to show the acrylic cutter .
Just let u know how much u cutting off from the EOS slant part

Flairtender · 24-05-2013, 11:27 PM

6 x 2.5 ft coming up , having problem with photobucket ....

Occellatus · 24-05-2013, 11:30 PM

Way very very detailed with technical pics some more. Thumbs up up up!!!

I haven measured mine yet. Today busy remove side oyama and water change.

Flairtender · 24-05-2013, 11:34 PM

Quote:

Originally Posted by Occellatus

Way very very detailed with technical pics some more. Thumbs up up up!!!

I haven measured mine yet. Today busy remove side oyama and water change.

This month eng eng can do , first time using paint .... took me ard 30 mins to figure out how to draw shape and line !!!

Bracing very easy to measure leh , go to ur top tank view and see u will get wat i mean .

Occellatus · 24-05-2013, 11:39 PM

Bro i can do technical drawing for u la. Use hand sketch and apps me. I convert for you.

Yeah its easy! After reading ur post earlier, i went to tank top to see. Measured width of bracing (excluding tank glass thickness). Its 3 inches!!! So i can use the domensions liao!!!

Heres the lateral and longitudinal bracing width (excluding glass thickness at 3 inches).

Flairtender · 24-05-2013, 11:47 PM

Yes Occ , thats the way to measure !!! U got it !

Now u just need to go to my post 20 . See the bottom pc EOS slanted pc .

Measure from top again see the 385mm one issit the same ?

If same u are good to go !!!

( BTW , Pls dun ask me how to measure for tiles ... too chim for me to convert . U can try using my measurement and ask the tile cutter to calculate and cut for u ) Just to add on why i dun use tile , if u dun silicone down the base , when algae grow and u scrub the tiles will move too !!! this will damage ur side silicon and add extra pressure to the tank base )

Occellatus · 24-05-2013, 11:56 PM

385mm measured from internal glass wall (including 3 inch bracing) or from edge of bracing?

Should be from edge of bracing rite?

Flairtender · 25-05-2013, 12:02 AM

Quote:

Originally Posted by Occellatus

385mm measured from internal glass wall (including 3 inch bracing) or from edge of bracing?

Should be from edge of bracing rite?

Ok , still the same everything "VISUALIZE and MEASURE" from the top tank .

When u see from the top , u will see ur glass cover overlaping ur bracing rite ?

Just imagine the base is on top now , measure the 385 mm and if u can reach the 456 mm area without the bracing . Get wat i mean ?

My english not very good , dunno how to describe ....

Flairtender · 25-05-2013, 12:04 AM

measure from outer edge to edge of ur bracing .... should be quite easy to figure out !!!

Occellatus · 25-05-2013, 12:05 AM

I get it!!! Could not get it just now cause i measured from tank side and failed to visualise from the inside.

Its 385mm!!! See....correct?

24-05-2013, 11:25 PM	#21
Flairtender Dragon Join Date: Jul 2001 Posts: 1,141	This is just for ur reference , no need to show the acrylic cutter . Just let u know how much u cutting off from the EOS slant part

24-05-2013, 11:27 PM	#22
Flairtender Dragon Join Date: Jul 2001 Posts: 1,141	6 x 2.5 ft coming up , having problem with photobucket ....

24-05-2013, 11:30 PM	#23
Occellatus Endangered Dragon Join Date: Jul 2005 Posts: 10,797	Way very very detailed with technical pics some more. Thumbs up up up!!! I haven measured mine yet. Today busy remove side oyama and water change.

24-05-2013, 11:39 PM	#25
Occellatus Endangered Dragon Join Date: Jul 2005 Posts: 10,797	Bro i can do technical drawing for u la. Use hand sketch and apps me. I convert for you. Yeah its easy! After reading ur post earlier, i went to tank top to see. Measured width of bracing (excluding tank glass thickness). Its 3 inches!!! So i can use the domensions liao!!! Heres the lateral and longitudinal bracing width (excluding glass thickness at 3 inches).

24-05-2013, 11:47 PM	#26
Flairtender Dragon Join Date: Jul 2001 Posts: 1,141	Yes Occ , thats the way to measure !!! U got it ! Now u just need to go to my post 20 . See the bottom pc EOS slanted pc . Measure from top again see the 385mm one issit the same ? If same u are good to go !!! ( BTW , Pls dun ask me how to measure for tiles ... too chim for me to convert . U can try using my measurement and ask the tile cutter to calculate and cut for u ) Just to add on why i dun use tile , if u dun silicone down the base , when algae grow and u scrub the tiles will move too !!! this will damage ur side silicon and add extra pressure to the tank base )

24-05-2013, 11:56 PM	#27
Occellatus Endangered Dragon Join Date: Jul 2005 Posts: 10,797	385mm measured from internal glass wall (including 3 inch bracing) or from edge of bracing? Should be from edge of bracing rite?

25-05-2013, 12:04 AM	#29
Flairtender Dragon Join Date: Jul 2001 Posts: 1,141	measure from outer edge to edge of ur bracing .... should be quite easy to figure out !!!

25-05-2013, 12:05 AM	#30
Occellatus Endangered Dragon Join Date: Jul 2005 Posts: 10,797	I get it!!! Could not get it just now cause i measured from tank side and failed to visualise from the inside. Its 385mm!!! See....correct?

Currently Active Users Viewing This Thread: 2 (0 members and 2 guests)