Laying Acrylic as Tank Base

[Occellatus]

My endy from below also luan kan. So late liao still open glass cover to disturb them.

[Flairtender]

Tio lah lah , cannot measure from the side cause if got oyama cannot see !

U dun actually have to open the top cover also .... glass cover is transparent and can measure overlapping if u know wat i mean .

[Occellatus]

Originally Posted by Flairtender

Tio lah lah , cannot measure from the side cause if got oyama cannot see !

U dun actually have to open the top cover also .... glass cover is transparent and can measure overlapping if u know wat i mean .

Ok. I will bring your dimensions to go cut tomorrow. Should be correct based on what I've counter measured earlier. I will tell them to split the entire thing into half so that I can place them in.

[Flairtender]

Originally Posted by Occellatus

Ok. I will bring your dimensions to go cut tomorrow. Should be correct based on what I've counter measured earlier. I will tell them to split the entire thing into half so that I can place them in.

Put in must got skill also hoh .

First lower the pc without EOS halfway only and use a long pvc pipe or those mr aqua ohf long piping . ( Inverted broom also can lah )

Hold half the acrylic and slowly lay down once u get it to sit in between ur bracing , then slowly use the hard piping to push to the end first .

The again do the same for the eos part , leave some gap for the EOS part so next time can remove easily .

(* My dimension already got gap allowance so dun go and minus further )

[Occellatus]

Don't understand. Wahahahhahaha.......

Laying should be ok la. Should not be that hard. If keep fish so long lay acrylic also cannot then die Liao.

Tomorrow the toa payoh shop open? Any idea?

[Flairtender]

Originally Posted by Occellatus

Don't understand. Wahahahhahaha.......

Laying should be ok la. Should not be that hard. If keep fish so long lay acrylic also cannot then die Liao.

Tomorrow the toa payoh shop open? Any idea?

When u lay not too fast also , ur fish will get stress from the new white acrylic . Try buy the matt white type .

Toa payoh ?? Dama at UBI leh .... sat go long queue ah !!! I go weekdays , half and hour , slant cut also gao tim liao . If all straight cut lagi fast .

[Occellatus]

Originally Posted by Flairtender

When u lay not too fast also , ur fish will get stress from the new white acrylic . Try buy the matt white type .

Toa payoh ?? Dama at UBI leh .... sat go long queue ah !!! I go weekdays , half and hour , slant cut also gao tim liao . If all straight cut lagi fast .

Ok I get the Matt type. Long queue? So many ppl doing acrylic on sats ar?

The tpy is cut tiles one. Solly, got mixed up.

[Flairtender]

Originally Posted by itchy

Bro, can trouble you to help fellow Buangkokrian to measure when you free? Thinking to chnage white base see see

Bro u are lucky , i got something easy to measure and comfirm ur measurement . Pm me ur no .

[Flairtender]

Originally Posted by Occellatus

Ok I get the Matt type. Long queue? So many ppl doing acrylic on sats ar?

The tpy is cut tiles one. Solly, got mixed up.

Supplier from all chain .... I also see ppl custom made those 4 to 5 footer big denitrator or protein skimmer there also . All those reefers favourite DIY place .

[Occellatus]

Originally Posted by Flairtender

Supplier from all chain .... I also see ppl custom made those 4 to 5 footer big denitrator or protein skimmer there also . All those reefers favourite DIY place .

Good lord. I better go early then. Be the first in line. Go early finish early.