|
06-04-2012, 12:52 AM | #41 |
AFC Associate
Join Date: Aug 2003
Posts: 757
|
Commission of 10x4.5x3 Tank
g) Sump & accies
Thank you for those who have viewed this thread. It was kind of lengthly due to schedue that needed to be in line with the rest of the houses' construction and renovation work i.e. flooring construction, water availability, electricity availability etc. This will be the last section for the project. Following is the left compartment of sump tank where - top shelf housed the sine wave UPS (2 no. for 2 key pumps) - bottom shelf housed the rest of power head and piping Whereas for centre compartment of sump - top shelf housed another UPS for air bubble pump and control panel for 8 lights (each has individual control/timer) - bottom shelf housed the inlet to the sump And the right compartment of sump - housed the main electrical control - has control valve and powerhead for water changing (auto /force drain up to 50% of tank volume) - has linked up to OHF filter No cable is allowed in the tank for the fishes will have these cable eaten). Good days. You are invited to our web at http://www.tankmaker.com for other detail. Last edited by tank_maker; 06-04-2012 at 12:59 AM. Reason: test edit |
08-04-2012, 07:43 PM | #42 |
AFC Associate
Join Date: Aug 2003
Posts: 757
|
thanks for viewing
|
26-05-2012, 08:40 AM | #43 |
AFC Associate
Join Date: Aug 2003
Posts: 757
|
onsite construction and metal stand
Thank you for bro who further enquire on other services provided by us.
1) on-ste construction It will only be economical solution for tank 833 ft or bigger. The cost of workmanship could be more than a finished tank completed at factory due to heavy manual labour involved; 3 to 4 glass maker needed to be there for 3 trips. With these concern, we do not provide on site glass repair. 2) Metal Stand We provide customized iron stand to bigger tank like this case of 10 footer where by the tank is fully supported by 16 legs for 10x4.5ft and 8+4 legs for 10x2.5x3 tanks. Metal stand that has 4 legs is not a recommended design for extreme point stress will be imposed on to the glass tank due to uneven / inadequate support. thus our team will not be supplying metal stand that has only 4 legs (like the case of 2 tier tank). Last edited by tank_maker; 07-07-2012 at 12:13 PM. Reason: text edit |
|
Currently Active Users Viewing This Thread: 2 (0 members and 2 guests) | |
|
|