![]() |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
![]() AFC Member
![]() Join Date: May 2003
Posts: 7,327
|
![]()
by Tank Junction - 72'' x 30'' x 30'' 12mm cab sump, full siliconless piping, media & accessories
Check out the special features and exclusive ideas of TJ in this product: MAIN TANK Tank Specs: 72'' x 30'' x 30'' with 12 mm thickness Japan Asahi Grade 1 Glass - Nowadays, aquariums are considered as one of the most modern forms of interior décor accessory in home or workplace in order to enhance the overall aesthetic appeal. Our manufactured glass tanks boast of all round machine polish Japan Asahi Grade 1 glass to prevent cuts or injuries due to the smooth edges created by the machine polish as compared to hand chamfered tanks. Thus, a very refined and professional finishing look is guaranteed. Perimeter Bracing – Euro Bracing Top and Bottom: Bracing for tanks on top as well as bottom. Strengthens and supports the glass of the tanks by pulling it together as pressure is always applied at the biggest surface areas which are the front and back; also not forgetting the works of gravitational pull at the bottom. Double-up as a support for glass covers and prevents fish from jumping out as well. Euro Bracing is characterized by a narrow glass strip that runs around the entire top perimeter of the tank, as well as a center glass brace that runs front to back. The braces are set inside the top and bottom edge of the tank. This thus adds stability to the tank in general. Overflow box: Triangular Left hand Side - Suction effect of this installation allows sediments at the bottom of the tank to be filtered out by flowing into the box instead of circulating in the tank. Over-flow box act as surface skimmer for suspended particles. Our overflows are constructed out of glass with acrylic overlay. The tank’s cleanliness can thus be maintained fuss-free. We also have our very own exclusive laser cut acrylic comb for the filter. This comb is unlike the others found in the market, boasting better flexibility but at the same time, very durable. Dow Corning silicon: Black - Dow Corning silicon is widely acclaimed in the aquarium industry as the most suitable silicon for aquarium tanks as it is not poisonous and thus, will not harm the marine life in the tank. In this case, black silicon has been chosen. Black silicon is beneficial for it will not take on dye from medication and if algae collect in the corners it will not be as visible. Clear silicon is also available at your request. Oyama pasting: Light Blue (Base, Back, Right Hand Side, Left Hand Side) - Oyama pasting is almost synonymous with a splendid looking fish tank. Oyama services are provided with a wide range of self adhesive color films available rather than the standard Black, Blue or White. Light Blue Oyama has been chosen in this case. Feel free to personalize your tank with various colors of matt or gloss posters. Adding coloured film to your tank creates a decorative effect that really compliments the ambience of a room without dominating or overpowering it. We are open to any idea or design you may have in mind. We will be able to tell you if it's possible to create it, and give you a free estimate as to the fabrication cost. All with absolutely no obligation whatsoever. Plumbing Holes – Almost all of the tanks manufactured by us have 4 machine polished holes on the top bracing, 2 holes at the front top bracing and 2 holes at the back top bracing. The holes can double-up as convenience sake when it comes to feeding small food and acts as a mean to tidy wire management such as the wire cords from wavemakers, oscillators and other types of surge devices. Glass Covers – Our glass covers are finished with oyama trimmings with holes on top. Oyama trimmings are a safety precaution to protect you from cuts caused by the edges of glass covers. It also serves as an added resistance to breaking and chipping. The black oyama trimmings also give the tank a pleasant overall look. Holes drilled into glass covers allows better grip handle during removal of glass covers. Having glass panes reduces the level of evaporation particularly if the tank is situated in an air-conditioned room, which means you don’t need to top off the tank frequently. To be continued...
__________________
SG Bros/Tank Junction/4K Lightings/MYCO3 AF/AFC Preferred Fish Tank Specialist Since 2003 LIKE US ON: www.facebook.com/sgbros or /tankjunction or /MYCO3logistic or /4klightings |
![]() |
![]() |
![]() |
#2 |
![]() AFC Member
![]() Join Date: May 2003
Posts: 7,327
|
![]()
CABINET
Cabinet Specs: 72" x 30" cabinet with chengai structure Choice of wood for Cabinet: Chengai - Chengai solid structured wood cabinet was chosen by our customer in this case. We do have Kapor available as well. Both are naturally durable, containing substances which repel wood-destroying agents and fungal infestation. They can safely be used without preservative treatment in all climates. These two types of timber are water-resistant. Due to its hardy and solid nature, Kapur and Chengal enable support for heavy tanks. Louver Doors and Removable Center Structure - One popular key feature of our TJ cabinets are our 45 degree cutting downwards sloping at the top of doors, which allows minimal effort when opening the cabinet. As such, we do not need to open the doors using the conventional way of bending all the way down to open the doors from below, enhancing convenience. Our doors come with ABS trimmings. This ensure that the doors are waterproof, increasing protection of the doors. Louvers on the doors allow better ventilation as the electrical equipment such as pumps in the sump tank generates heat. Louvers enable the hot air to steam out and are thus highly recommended. The removal centre structure acts as a pivot to provide better stability and ease of removal of sump tanks. Lamination: 3 way lamination (EMS 2722 Silver Brush by EDL - we have 3-way lamination or 4-way lamination with many colors of the Formica to choose from. As the picture shows, we even line up the surface area of the holes with Formica paper for a neater look as well as better comfort. This is another trademark feature of TJ cabinets. Hood and Borders - The L-shape and straight borders cover up the sides of the tank, giving it a full height cabinet look.The hood covers up the lights of the tank. SUMP TANK Sump Tank Specs: 60" x 24" x 18/16" 10mm Main Sump Tank: sloping and wet - we also have straight sump tank as well as dry sump tank available. Sump tank covers - Sump tank covers are provided to prevent water from splashing out and affecting the interior of the cabinet. We have installed 2 long strips along the last 3 compartments of the sump tank to allow the placing of the acrylic tank covers. Full siliconless piping - Piping can be used for immediate submersion into the water as there will no acrylic or poisonous smell affecting the water. Our sump tanks use a special mould casket instead.
__________________
SG Bros/Tank Junction/4K Lightings/MYCO3 AF/AFC Preferred Fish Tank Specialist Since 2003 LIKE US ON: www.facebook.com/sgbros or /tankjunction or /MYCO3logistic or /4klightings |
![]() |
![]() |
![]() |
#3 |
![]() AFC Member
![]() Join Date: May 2003
Posts: 7,327
|
![]()
ACCESSORIES AND MEDIA
Full media package and Accessories: Economical full media package and setup (Mr Aqua package). Includes Mr Aqua Ceramic Rings, Bio-ball, Jap Matt, Coral Chip, Bacteria House, Cotton wool and Volcano rocks. Accessories include Ranger AC/DC air tube, tube holder, long air disc, Biohome plus, Eheim 1264 water pump and Aquazonic 11W UV light. Extensions: 4 way extensions (1x pcs) Lighting - Hopar T8 lighting 6ft: Customer chose 1 piece of white. Other colours available as well. OTHER SERVICES -Fish Catching. -Disposal of old tank. -THE END-
__________________
SG Bros/Tank Junction/4K Lightings/MYCO3 AF/AFC Preferred Fish Tank Specialist Since 2003 LIKE US ON: www.facebook.com/sgbros or /tankjunction or /MYCO3logistic or /4klightings |
![]() |
![]() |
![]() |
#4 |
![]() AFC Member
![]() Join Date: May 2003
Posts: 7,327
|
![]()
by Tank Junction - 36'' x 18'' x 18'' 6mm 1-tier
Check out the special features and exclusive ideas of TJ in this product: MAIN TANK Tank Specs: 36'' x 18'' x 18'' with 6 mm thickness Japan Asahi Grade 1 Glass - Nowadays, aquariums are considered as one of the most modern forms of interior décor accessory in home or workplace in order to enhance the overall aesthetic appeal. Our manufactured glass tanks boast of all round machine polish Japan Asahi Grade 1 glass to prevent cuts or injuries due to the smooth edges created by the machine polish as compared to hand chamfered tanks. Thus, a very refined and professional finishing look is guaranteed. Perimeter Bracing – Euro Bracing Top and Bottom: Bracing for tanks on top as well as bottom. Strengthens and supports the glass of the tanks by pulling it together as pressure is always applied at the biggest surface areas which are the front and back; also not forgetting the works of gravitational pull at the bottom. Double-up as a support for glass covers and prevents fish from jumping out as well. Euro Bracing is characterized by a narrow glass strip that runs around the entire top perimeter of the tank, as well as a center glass brace that runs front to back. The braces are set inside the top and bottom edge of the tank. This thus adds stability to the tank in general. Dow Corning silicon: Black - Dow Corning silicon is widely acclaimed in the aquarium industry as the most suitable silicon for aquarium tanks as it is not poisonous and thus, will not harm the marine life in the tank. In this case, black silicon has been chosen. Black silicon is beneficial for it will not take on dye from medication and if algae collect in the corners it will not be as visible. Clear silicon is also available at your request. Oyama pasting: Black (Base, Back, Left Hand Side) - Oyama pasting is almost synonymous with a splendid looking fish tank. Oyama services are provided with a wide range of self adhesive color films available rather than the standard Black, Blue or White. Black Oyama has been chosen in this case. Feel free to personalize your tank with various colors of matt or gloss posters. Adding coloured film to your tank creates a decorative effect that really compliments the ambience of a room without dominating or overpowering it. We are open to any idea or design you may have in mind. We will be able to tell you if it's possible to create it, and give you a free estimate as to the fabrication cost. All with absolutely no obligation whatsoever. Plumbing Holes – Almost all of the tanks manufactured by us have 4 machine polished holes on the top bracing, 2 holes at the front top bracing and 2 holes at the back top bracing. The holes can double-up as convenience sake when it comes to feeding small food and acts as a mean to tidy wire management such as the wire cords from wavemakers, oscillators and other types of surge devices. Customer has requested to have 4 holes instead of two at the back of the tank. Glass Covers – Our glass covers are finished with oyama trimmings with holes on top. Oyama trimmings are a safety precaution to protect you from cuts caused by the edges of glass covers. It also serves as an added resistance to breaking and chipping. The black oyama trimmings also give the tank a pleasant overall look. Holes drilled into glass covers allows better grip handle during removal of glass covers. Having glass panes reduces the level of evaporation particularly if the tank is situated in an air-conditioned room, which means you don’t need to top off the tank frequently. METAL STAND Metal Stand Specs: 36'' x 18'' x 33'' single tier with 1'' square bar -THE END-
__________________
SG Bros/Tank Junction/4K Lightings/MYCO3 AF/AFC Preferred Fish Tank Specialist Since 2003 LIKE US ON: www.facebook.com/sgbros or /tankjunction or /MYCO3logistic or /4klightings Last edited by nosense; 18-10-2012 at 06:39 PM. |
![]() |
![]() |
![]() |
#5 |
![]() AFC Member
![]() Join Date: May 2003
Posts: 7,327
|
![]()
by Tank Junction - 48'' x 24'' x 24'' 10mm bare tank
Check out the special features and exclusive ideas of TJ in this product: MAIN TANK Tank Specs: 48'' x 24'' x 24'' with 10 mm thickness Japan Asahi Grade 1 Glass - Nowadays, aquariums are considered as one of the most modern forms of interior décor accessory in home or workplace in order to enhance the overall aesthetic appeal. Our manufactured glass tanks boast of all round machine polish Japan Asahi Grade 1 glass to prevent cuts or injuries due to the smooth edges created by the machine polish as compared to hand chamfered tanks. Thus, a very refined and professional finishing look is guaranteed. Dow Corning silicon: Black - Dow Corning silicon is widely acclaimed in the aquarium industry as the most suitable silicon for aquarium tanks as it is not poisonous and thus, will not harm the marine life in the tank. In this case, black silicon has been chosen. Black silicon is beneficial for it will not take on dye from medication and if algae collect in the corners it will not be as visible. Clear silicon is also available at your request. Oyama pasting: Black (Base, Back, Right Hand Side, Left Hand sSide) - Oyama pasting is almost synonymous with a splendid looking fish tank. Oyama services are provided with a wide range of self adhesive color films available rather than the standard Black, Blue or White. Black Oyama has been chosen in this case. Feel free to personalize your tank with various colors of matt or gloss posters. Adding coloured film to your tank creates a decorative effect that really compliments the ambience of a room without dominating or overpowering it. We are open to any idea or design you may have in mind. We will be able to tell you if it's possible to create it, and give you a free estimate as to the fabrication cost. All with absolutely no obligation whatsoever. Plumbing Holes – Almost all of the tanks manufactured by us have 4 machine polished holes on the top bracing, 2 holes at the front top bracing and 2 holes at the back top bracing. The holes can double-up as convenience sake when it comes to feeding small food and acts as a mean to tidy wire management such as the wire cords from wavemakers, oscillators and other types of surge devices. In this case, our customer has requested for an extra hole at the back of the tank. Glass Covers – Our glass covers are finished with oyama trimmings with holes on top. Oyama trimmings are a safety precaution to protect you from cuts caused by the edges of glass covers. It also serves as an added resistance to breaking and chipping. The black oyama trimmings also give the tank a pleasant overall look. Holes drilled into glass covers allows better grip handle during removal of glass covers. Having glass panes reduces the level of evaporation particularly if the tank is situated in an air-conditioned room, which means you don’t need to top off the tank frequently. -THE END-
__________________
SG Bros/Tank Junction/4K Lightings/MYCO3 AF/AFC Preferred Fish Tank Specialist Since 2003 LIKE US ON: www.facebook.com/sgbros or /tankjunction or /MYCO3logistic or /4klightings |
![]() |
![]() |
![]() |
#6 | |
New Member
![]() Join Date: Dec 2011
Posts: 29
|
![]() Quote:
Can i have a quote for the above but size is 7ft x 2.5ft x 2.5ft. Thanks |
|
![]() |
![]() |
![]() |
#7 |
![]() AFC Member
![]() Join Date: May 2003
Posts: 7,327
|
![]()
by Tank Junction - 72'' x 36'' x 30'' 12mm, 15mm base tank + galvanized metal stand + sump tank
Check out the special features and exclusive ideas of TJ in this product: MAIN TANK Tank Specs: 72'' x 36'' x 30'' with 12 mm thickness and 15 mm base Japan Asahi Grade 1 Glass - Nowadays, aquariums are considered as one of the most modern forms of interior décor accessory in home or workplace in order to enhance the overall aesthetic appeal. Our manufactured glass tanks boast of all round machine polish Japan Asahi Grade 1 glass to prevent cuts or injuries due to the smooth edges created by the machine polish as compared to hand chamfered tanks. Thus, a very refined and professional finishing look is guaranteed. Perimeter Bracing – Euro Bracing Top and Bottom: Bracing for tanks on top as well as bottom. Strengthens and supports the glass of the tanks by pulling it together as pressure is always applied at the biggest surface areas which are the front and back; also not forgetting the works of gravitational pull at the bottom. Double-up as a support for glass covers and prevents fish from jumping out as well. Euro Bracing is characterized by a narrow glass strip that runs around the entire top perimeter of the tank, as well as a center glass brace that runs front to back. The braces are set inside the top and bottom edge of the tank. This thus adds stability to the tank in general. Overflow box: Rectangular Center of Right hand Side - Suction effect of this installation allows sediments at the bottom of the tank to be filtered out by flowing into the box instead of circulating in the tank. Over-flow box act as surface skimmer for suspended particles. Our overflows are constructed out of glass with acrylic overlay. The tank’s cleanliness can thus be maintained fuss-free. We also have our very own exclusive laser cut acrylic comb for the filter. This comb is unlike the others found in the market, boasting better flexibility but at the same time, very durable. Customer has requested to add black acrylic all around OF box. Dow Corning silicon: Black - Dow Corning silicon is widely acclaimed in the aquarium industry as the most suitable silicon for aquarium tanks as it is not poisonous and thus, will not harm the marine life in the tank. In this case, black silicon has been chosen. Black silicon is beneficial for it will not take on dye from medication and if algae collect in the corners it will not be as visible. Clear silicon is also available at your request. Oyama pasting: Black (Base, OF box) - Oyama pasting is almost synonymous with a splendid looking fish tank. Oyama services are provided with a wide range of self adhesive color films available rather than the standard Black, Blue or White. Black Oyama has been chosen in this case. Feel free to personalize your tank with various colors of matt or gloss posters. Adding coloured film to your tank creates a decorative effect that really compliments the ambience of a room without dominating or overpowering it. We are open to any idea or design you may have in mind. We will be able to tell you if it's possible to create it, and give you a free estimate as to the fabrication cost. All with absolutely no obligation whatsoever. Plumbing Holes – Almost all of the tanks manufactured by us have 4 machine polished holes on the top bracing, 2 holes at the front top bracing and 2 holes at the back top bracing. The holes can double-up as convenience sake when it comes to feeding small food and acts as a mean to tidy wire management such as the wire cords from wavemakers, oscillators and other types of surge devices. Glass Covers – Our glass covers are finished with oyama trimmings with holes on top. Oyama trimmings are a safety precaution to protect you from cuts caused by the edges of glass covers. It also serves as an added resistance to breaking and chipping. The black oyama trimmings also give the tank a pleasant overall look. Holes drilled into glass covers allows better grip handle during removal of glass covers. Having glass panes reduces the level of evaporation particularly if the tank is situated in an air-conditioned room, which means you don’t need to top off the tank frequently. To be continued...
__________________
SG Bros/Tank Junction/4K Lightings/MYCO3 AF/AFC Preferred Fish Tank Specialist Since 2003 LIKE US ON: www.facebook.com/sgbros or /tankjunction or /MYCO3logistic or /4klightings |
![]() |
![]() |
![]() |
#8 |
![]() AFC Member
![]() Join Date: May 2003
Posts: 7,327
|
![]()
METAL STAND
Cabinet Specs: 72" x 36" x 33" metal stand Metal Stand - 6 legged metal stand with galvanised steel. Galvanised steel offers better protection and durability. SUMP TANK Sump Tank Specs: 48" x 24" x 18" 8mm Main Sump Tank: straight and wet - we also have sloping sump tank as well as dry sump tank available. Sump tank covers - Sump tank covers are provided to prevent water from splashing out and affecting the interior of the cabinet. We have installed 2 long strips along the last 3 compartments of the sump tank to allow the placing of the acrylic tank covers. Full siliconless piping - Piping can be used for immediate submersion into the water as there will no acrylic or poisonous smell affecting the water. Our sump tanks use a special mould casket instead. Customer has also requested for Y-check drainage pipe. ACCESSORIES AND MEDIA Accescories: Drainage system (Auto), full piping system with 30mm pipes all the way up to OF box. -THE END-
__________________
SG Bros/Tank Junction/4K Lightings/MYCO3 AF/AFC Preferred Fish Tank Specialist Since 2003 LIKE US ON: www.facebook.com/sgbros or /tankjunction or /MYCO3logistic or /4klightings |
![]() |
![]() |
![]() |
#9 |
![]() AFC Member
![]() Join Date: May 2003
Posts: 7,327
|
![]()
by Tank Junction - 62'' x 30'' x 2.5 tank + sump piping, full height cabinet, glass OHF
Check out the special features and exclusive ideas of TJ in this product: MAIN TANK Tank Specs: 62'' x 30'' x 2.5 with 12 mm thickness Japan Asahi Grade 1 Glass - Nowadays, aquariums are considered as one of the most modern forms of interior décor accessory in home or workplace in order to enhance the overall aesthetic appeal. Our manufactured glass tanks boast of all round machine polish Japan Asahi Grade 1 glass to prevent cuts or injuries due to the smooth edges created by the machine polish as compared to hand chamfered tanks. Thus, a very refined and professional finishing look is guaranteed. Perimeter Bracing – Euro Bracing Top and Bottom: Bracing for tanks on top as well as bottom. Strengthens and supports the glass of the tanks by pulling it together as pressure is always applied at the biggest surface areas which are the front and back; also not forgetting the works of gravitational pull at the bottom. Double-up as a support for glass covers and prevents fish from jumping out as well. Euro Bracing is characterized by a narrow glass strip that runs around the entire top perimeter of the tank, as well as a center glass brace that runs front to back. The braces are set inside the top and bottom edge of the tank. This thus adds stability to the tank in general. Overflow box: Triangular Full Size Left Hand Side - Suction effect of this installation allows sediments at the bottom of the tank to be filtered out by flowing into the box instead of circulating in the tank. Over-flow box act as surface skimmer for suspended particles. Our overflows are constructed out of glass with acrylic overlay. The tank’s cleanliness can thus be maintained fuss-free. We also have our very own exclusive laser cut acrylic comb for the filter. This comb is unlike the others found in the market, boasting better flexibility but at the same time, very durable. Dow Corning silicon: Black - Dow Corning silicon is widely acclaimed in the aquarium industry as the most suitable silicon for aquarium tanks as it is not poisonous and thus, will not harm the marine life in the tank. In this case, black silicon has been chosen. Black silicon is beneficial for it will not take on dye from medication and if algae collect in the corners it will not be as visible. Clear silicon is also available at your request. Oyama pasting: Black (Base, Back, Right Hand Side, Left Hand Side) - Oyama pasting is almost synonymous with a splendid looking fish tank. Oyama services are provided with a wide range of self adhesive color films available rather than the standard Black, Blue or White. Black Oyama has been chosen in this case. Feel free to personalize your tank with various colors of matt or gloss posters. Adding coloured film to your tank creates a decorative effect that really compliments the ambience of a room without dominating or overpowering it. We are open to any idea or design you may have in mind. We will be able to tell you if it's possible to create it, and give you a free estimate as to the fabrication cost. All with absolutely no obligation whatsoever. Plumbing Holes – Almost all of the tanks manufactured by us have 4 machine polished holes on the top bracing, 2 holes at the front top bracing and 2 holes at the back top bracing. The holes can double-up as convenience sake when it comes to feeding small food and acts as a mean to tidy wire management such as the wire cords from wavemakers, oscillators and other types of surge devices. Glass Covers – Our glass covers are finished with oyama trimmings with holes on top. Oyama trimmings are a safety precaution to protect you from cuts caused by the edges of glass covers. It also serves as an added resistance to breaking and chipping. The black oyama trimmings also give the tank a pleasant overall look. Holes drilled into glass covers allows better grip handle during removal of glass covers. Having glass panes reduces the level of evaporation particularly if the tank is situated in an air-conditioned room, which means you don’t need to top off the tank frequently.
__________________
SG Bros/Tank Junction/4K Lightings/MYCO3 AF/AFC Preferred Fish Tank Specialist Since 2003 LIKE US ON: www.facebook.com/sgbros or /tankjunction or /MYCO3logistic or /4klightings |
![]() |
![]() |
![]() |
#10 |
![]() AFC Member
![]() Join Date: May 2003
Posts: 7,327
|
![]()
CABINET
Cabinet Specs: 174cm x 64cm x 249.5cm full height cabinet with kapor structure Choice of wood for Cabinet: Kapor - Kapor solid structured wood cabinet was chosen by our customer in this case. We do have Chengal available as well. Both are naturally durable, containing substances which repel wood-destroying agents and fungal infestation. They can safely be used without preservative treatment in all climates. These two types of timber are water-resistant. Due to its hardy and solid nature, Kapur and Chengal enable support for heavy tanks. Full Height Cabinet With 4 Doors - As per customer request, we have constructed a full height cabinet, with 4 doors on the top and at the bottom. Customer used the cabinet to store his sump tank as well as for his own personal use. For example, it also functions as a shoe cabinet. SUMP TANK Sump Tank Specs: 28" x 18" x 20" 6mm Main Sump Tank: straight and wet - we also have sloping sump tank as well as dry sump tank available. Sump tank covers - Sump tank covers are provided to prevent water from splashing out and affecting the interior of the cabinet. We have installed 2 long strips along the last 3 compartments of the sump tank to allow the placing of the acrylic tank covers. Full siliconless piping - Piping can be used for immediate submersion into the water as there will no acrylic or poisonous smell affecting the water. Our sump tanks use a special mould casket instead. At our customer's request, we have further customised our customer's piping. The top and drainage pipes connect and supply the toilet bowl onto the top up system as well as drainage pipe overflow. ACCESSORIES AND MEDIA Accessories:Customer request for a customised OHF with dimensions 52'' x 6'' x 8'' connecting to the sump. -THE END-
__________________
SG Bros/Tank Junction/4K Lightings/MYCO3 AF/AFC Preferred Fish Tank Specialist Since 2003 LIKE US ON: www.facebook.com/sgbros or /tankjunction or /MYCO3logistic or /4klightings |
![]() |
![]() |
![]() |
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|