DIY Idea: Wrought Iron Design For Tank Stands

wei_yuan86 · 13-02-2011, 12:01 AM

Hello all, i'd like to share a practice that i have. Whenever i purchase/ receive/ find old or second hand tank sets. The stands are either rusty or are not in the best of condition most times. So i always give the stands a fresh coat of paint before using them. Through this practice, i try improve the look of the stands on top of just giving them a base coat. So let me share a method that will give your iron stand a "wrought-iron" look even though it may just be a plain old iron stand.

Here's what you need...

To give your stand a fresh even coat of a base paint (i've used black for mine):

Then you'll need a dry rough scrub (i got mine for 80cents at ABC value shop. Each stack has 30pcs! Enough for you to use them on your dishes after this project!):

Purchase a small tin of gold paint (i got mine for $3+ from a normal hardware shop. Do take note that most hardware shops carry another variant that is much more expensive):

Next use a chop stick to dip into the paint and give one end of your sponge a VERY light coat of gold paint (too much and you will create thick undefined blotches of paint marks for your wrought iron design):

Apply the gold paint at an angle ( about 45degrees for me) and very lightly swipe the sponge against the iron stand, creating a design like this:

Here's a picture to show how the progress of your "new" wrought iron stand should look like ( bottom half completed, progressing upwards) :

Now, if your lucky the rubber base on your stand's legs will be in good condition and not worn out like this:

If it is, all you have to do is purchase rubber stoppers from your nearest hardware shop and simply fit it in on each leg! (be sure to trim the sides of the existing rubber base that protrudes out first for a better fit):

Your final product :

So the next time you walk past a tank set that looks like it doesn't belong in your nice and lovely home– Make sure to reconsider!

Total items bought: Black paint, gold paint, sponge, rubber stoppers, paint brush.
Total cost: About $13

Cheers everyone! Thanks for viewing!

13-02-2011, 03:02 AM

Haha, good job bro. Looks like the real thing if I didnt know it was a DIY!

Young Man · 13-02-2011, 03:20 AM

good job! looks good

hahaha

13-02-2011, 03:28 AM

looking really good. well done TS

stillwater · 13-02-2011, 11:40 AM

great job done by TS and thanks 4 sharing.

Mr.Q · 13-02-2011, 01:11 PM

Well done bro,next time can copy from u liao

wei_yuan86 · 13-02-2011, 01:18 PM

Quote:

Originally Posted by beo

Haha, good job bro. Looks like the real thing if I didnt know it was a DIY!

Thanks Bro Beo. Haha and just to mention, my mom saw the stand with just its black base coat before she left home. When she came back, she saw it with the wrought-iron design and went crazy, lecturing me thinking I had bought ANOTHER STAND!!!

Quote:

Originally Posted by Young Man

good job! looks good

hahaha

Thanks Bro YM.

Quote:

Originally Posted by awj2703

looking really good. well done TS

Thanks Bro aw. Glad you like it.

Quote:

Originally Posted by stillwater

great job done by TS and thanks 4 sharing.

You're most welcome bro stillwater.

Quote:

Originally Posted by Mr.Q

Well done bro,next time can copy from u liao

Haha sure thing Mr. Q and i hope you have just as much fun as I did while working on this project!

ymmij · 13-02-2011, 01:34 PM

Great job diy... It is impressive...

Hershley · 13-02-2011, 02:15 PM

Nice DIY bro. thanks for sharing

limz_666 · 13-02-2011, 02:31 PM

looks brand new , will be good to have anti-rust primer to be base coat

13-02-2011, 12:01 AM	#1
wei_yuan86 Dragon Join Date: Apr 2010 Posts: 2,358	DIY Idea: Wrought Iron Design For Tank Stands Hello all, i'd like to share a practice that i have. Whenever i purchase/ receive/ find old or second hand tank sets. The stands are either rusty or are not in the best of condition most times. So i always give the stands a fresh coat of paint before using them. Through this practice, i try improve the look of the stands on top of just giving them a base coat. So let me share a method that will give your iron stand a "wrought-iron" look even though it may just be a plain old iron stand. Here's what you need... To give your stand a fresh even coat of a base paint (i've used black for mine): Then you'll need a dry rough scrub (i got mine for 80cents at ABC value shop. Each stack has 30pcs! Enough for you to use them on your dishes after this project!): Purchase a small tin of gold paint (i got mine for $3+ from a normal hardware shop. Do take note that most hardware shops carry another variant that is much more expensive): Next use a chop stick to dip into the paint and give one end of your sponge a VERY light coat of gold paint (too much and you will create thick undefined blotches of paint marks for your wrought iron design): Apply the gold paint at an angle ( about 45degrees for me) and very lightly swipe the sponge against the iron stand, creating a design like this: Here's a picture to show how the progress of your "new" wrought iron stand should look like ( bottom half completed, progressing upwards) : Now, if your lucky the rubber base on your stand's legs will be in good condition and not worn out like this: If it is, all you have to do is purchase rubber stoppers from your nearest hardware shop and simply fit it in on each leg! (be sure to trim the sides of the existing rubber base that protrudes out first for a better fit): Your final product : So the next time you walk past a tank set that looks like it doesn't belong in your nice and lovely home– Make sure to reconsider! Total items bought: Black paint, gold paint, sponge, rubber stoppers, paint brush. Total cost: About $13 Cheers everyone! Thanks for viewing!

13-02-2011, 03:02 AM	#2
beo Guest Posts: n/a	Haha, good job bro. Looks like the real thing if I didnt know it was a DIY!

13-02-2011, 03:20 AM	#3
Young Man Senior Dragon Join Date: Jul 2005 Posts: 3,042	good job! looks good hahaha

13-02-2011, 03:28 AM	#4
awj2703 Guest Posts: n/a	looking really good. well done TS

13-02-2011, 11:40 AM	#5
stillwater Arofanatic Join Date: Feb 2004 Posts: 430	great job done by TS and thanks 4 sharing.

13-02-2011, 01:11 PM	#6
Mr.Q Dragon Join Date: Mar 2010 Posts: 1,335	Well done bro,next time can copy from u liao

13-02-2011, 01:34 PM	#8
ymmij Senior Dragon Join Date: Apr 2005 Posts: 3,332	Great job diy... It is impressive...

13-02-2011, 02:15 PM	#9
Hershley Endangered Dragon Join Date: Jan 2009 Posts: 5,133	Nice DIY bro. thanks for sharing

13-02-2011, 02:31 PM	#10
limz_666 Arofanatic Join Date: Apr 2005 Posts: 377	looks brand new , will be good to have anti-rust primer to be base coat

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)