Tank Junction (a subsidiary of sg Bros) *Jun'12 New Tanksets and other related svcs*

[nosense]

by Tank Junction - 84'' x 18'' x 24'' 12mm tank, media & accessories with full height cabinet and 2 sets of 36'' x 15'' x 15'' 6mm tanks












Check out the special features and exclusive ideas of TJ in this product:

MAIN TANK

Tank Specs: : 84’’ x 18’’ x 24’’ with 12 mm thickness








Japan Asahi Grade 1 Glass - Nowadays, aquariums are considered as one of the most modern forms of interior décor accessory in home or workplace in order to enhance the overall aesthetic appeal. Our manufactured glass tanks boast of all round machine polish Japan Asahi Grade 1 glass to prevent cuts or injuries due to the smooth edges created by the machine polish as compared to hand chamfered tanks. Thus, a very refined and professional finishing look is guaranteed.




Perimeter Bracing – Euro Bracing Top and Bottom: Bracing for tanks on top as well as bottom. Strengthens and supports the glass of the tanks by pulling it together as pressure is always applied at the biggest surface areas which are the front and back; also not forgetting the works of gravitational pull at the bottom. Double-up as a support for glass covers and prevents fish from jumping out as well. Euro Bracing is characterized by a narrow glass strip that runs around the entire top perimeter of the tank, as well as a center glass brace that runs front to back. The braces are set inside the top and bottom edge of the tank. This thus adds stability to the tank in general.




IOS system: Rectangular Right hand Side - Suction effect of this installation allows sediments at the bottom of the tank to be filtered out by flowing into the box instead of circulating in the tank. Over-flow box act as surface skimmer for suspended particles. Our overflows are constructed out of glass with acrylic overlay.


To be continued...

[nosense]

Dow Corning silicon: Black - Dow Corning silicon is widely acclaimed in the aquarium industry as the most suitable silicon for aquarium tanks as it is not poisonous and thus, will not harm the marine life in the tank. In this case, black silicon has been chose. Black silicon is beneficial for it will not take on dye from medication and if algae collect in the corners it will not be as visible. Clear silicon is also available at your request.




Oyama pasting: Black (Base, Back, Left Hand Side) - Oyama pasting is almost synonymous with a splendid looking fish tank. Oyama services are provided with a wide range of self adhesive color films available rather than the standard Black, Blue or White. Black Oyama has been chosen in this case. Feel free to personalize your tank with various colors of matt or gloss posters. Adding coloured film to your tank creates a decorative effect that really compliments the ambience of a room without dominating or overpowering it. We are open to any idea or design you may have in mind. We will be able to tell you if it's possible to create it, and give you a free estimate as to the fabrication cost. All with absolutely no obligation whatsoever.




Plumbing Holes – Almost all of the tanks manufactured by us have 4 machine polished holes on the top bracing, 2 holes at the front top bracing and 2 holes at the back top bracing. The holes can double-up as convenience sake when it comes to feeding small food and acts as a mean to tidy wire management such as the wire cords from wavemakers, oscillators and other types of surge devices.




Glass Covers – Our glass covers are finished with oyama trimmings with holes on top. Oyama trimmings are a safety precaution to protect you from cuts caused by the edges of glass covers. It also serves as an added resistance to breaking and chipping. The black oyama trimmings also give the tank a pleasant overall look. Holes drilled into glass covers allows better grip handle during removal of glass covers. Having glass panes reduces the level of evaporation particularly if the tank is situated in an air-conditioned room, which means you don’t need to top off the tank frequently.


OTHER TANKS

Tank Specs: 36'' x 15'' x 15'' with 6 mm thickness






Japan Asahi Grade 1 Glass - Nowadays, aquariums are considered as one of the most modern forms of interior décor accessory in home or workplace in order to enhance the overall aesthetic appeal. Our manufactured glass tanks boast of all round machine polish Japan Asahi Grade 1 glass to prevent cuts or injuries due to the smooth edges created by the machine polish as compared to hand chamfered tanks. Thus, a very refined and professional finishing look is guaranteed.


Perimeter Bracing – 4 way bracing. Bracing for tanks on top as well as bottom. Strengthens and supports the glass of the tanks by pulling it together as pressure is always applied at the biggest surface areas which are the front and back; also not forgetting the works of gravitational pull at the bottom. Double-up as a support for glass covers and prevents fish from jumping out as well. The braces are set inside the top and bottom edge of the tank. This thus adds stability to the tank in general.


Dow Corning silicon: Black - Dow Corning silicon is widely acclaimed in the aquarium industry as the most suitable silicon for aquarium tanks as it is not poisonous and thus, will not harm the marine life in the tank. In this case, black silicon has been chose. Black silicon is beneficial for it will not take on dye from medication and if algae collect in the corners it will not be as visible. Clear silicon is also available at your request.


Oyama pasting: Black (Base, Back, Left hand side, Right hand side) - Oyama pasting is almost synonymous with a splendid looking fish tank. Oyama services are provided with a wide range of self adhesive color films available rather than the standard Black, Blue or White. Black Oyama has been chosen in this case. Feel free to personalize your tank with various colors of matt or gloss posters. Adding coloured film to your tank creates a decorative effect that really compliments the ambience of a room without dominating or overpowering it. We are open to any idea or design you may have in mind. We will be able to tell you if it's possible to create it, and give you a free estimate as to the fabrication cost. All with absolutely no obligation whatsoever.


Plumbing Holes – Almost all of the tanks manufactured by us have 4 machine polished holes on the top bracing, 2 holes at the front top bracing and 2 holes at the back top bracing. The holes can double-up as convenience sake when it comes to feeding small food and acts as a mean to tidy wire management such as the wire cords from wavemakers, oscillators and other types of surge devices.

To be continued...

[nosense]

CABINET

Cabinet Specs: Full height 88’’ x 21’’ x 102 2/8’’ with Kapor structure




Choice of wood for Cabinet: Kapor - Kapor solid structured wood cabinet was chosen by our customer in this case. We do have Chengal available as well. Both are naturally durable, containing substances which repel wood-destroying agents and fungal infestation. They can safely be used without preservative treatment in all climates. These two types of timber are water-resistant. Due to its hardy and solid nature, Kapur and Chengal enable support for heavy tanks.





Custom made doors and carpentry services - This cabinet has been manufactured due to our customer's special request. A full height cabinet by nature, the doors have all been constructed meticulously to ensure that space constraint and convenience will not clash. With the use of the BLUM series hinges accessories, known as a high end tool for hinges, our customer's requests have been met with satisfaction.




-Bottom Cabinet Doors: The doors below have been specially designed to be able to be pushed upwards in a sliding motion instead of the usual way of opening it 45 degrees. This is due to the space constraint between the cabinet and the main kitchen sink. As such, the doors will not come in contact with sink. In addition, the use of the BLUM series allows the door to be totally removed as well, giving the customer more freedom with the tanks when more space is required. It has been separated into two partitions to fit the two small tanks mentioned in the previous post.



-Main Cabinet Doors: The doors are opened 45 degrees upwards as per normal cabinets manufactured by Tank Junction as there is no obstruction with any object. The push up series is not feasible as well in this instance as it could come into contact with the ceiling above in addition to blocking the top cabinet doors. With the doors constructed here, it allows for the customer to conduct water transfer, fish feeding, fish catching etc.




-Top Cabinet Doors: The top of the cabinet has 4 doors, and is used to allow storage of items or accessories.




-Side Cabinet Doors: The side door allows easy access to the IOS area to allow the customer to change the pump, accessories etc with ease.


Lamination: 3 way lamination (5023X Island Recon by Lamitek) - we have 3-way lamination or 4-way lamination with many colors of the Formica to choose from.We even line up the surface area of the holes with Formica paper for a neater look as well as better comfort. This is another trademark feature of TJ cabinets.


ACCESSORIES AND MEDIA



Media and Accessories: Includes Mr Aqua Ceramic Rings (2x boxes), Jap Matt (1x pcs), Coral Chip (1kg), Bacteria House (2x boxes) and Cotton wool (1x packet). Additional accessories includes the Eheim 1260 water pump and ADA Nile Sand 5.2L (4x packet)


Extensions: 5 way extensions (3x pcs)


Lighting - Hopar T5 lighting 6ft: Customer chose 6 pieces of warm white and 2 pieces of cool white. Other colours available as well.






-THE END-

[nosense]

by Tank Junction - Custom made top cover + base frame, L-borders & closed up hood










Check out the special features and exclusive ideas of TJ in this product:

Carpentry Services

-Custom made top cover, base frame, L-borders and closed up hood for 1752mm x 530mm x 775mm cabinet

[nosense]

by Tank Junction - 48'' x 30'' x 36'' 15mm (glass in glass) tank + supply 1'' foam






Check out the special features and exclusive ideas of TJ in this product:

MAIN TANK

Tank Specs: 48’’ x 30’’ x 36’’ with 15 mm thickness



Japan Asahi Grade 1 Glass - Nowadays, aquariums are considered as one of the most modern forms of interior décor accessory in home or workplace in order to enhance the overall aesthetic appeal. Our manufactured glass tanks boast of all round machine polish Japan Asahi Grade 1 glass to prevent cuts or injuries due to the smooth edges created by the machine polish as compared to hand chamfered tanks. Thus, a very refined and professional finishing look is guaranteed.






Perimeter Bracing with glass in glass structure – Bracing Top and Bottom: Bracing for tanks on top as well as bottom. Strengthens and supports the glass of the tanks by pulling it together as pressure is always applied at the biggest surface areas which are the front and back; also not forgetting the works of gravitational pull at the bottom. Double-up as a support for glass covers and prevents fish from jumping out as well. Customer has requested for additional triangular glass in glass structure at all 4 corners of the tank. This provides added stability despite the absence of the Euro Bracing as it aids in further pulling of the glass together. It also seals off the silicon inside the glass, preventing fishes from eating the silicon.


Dow Corning silicon: Black - Dow Corning silicon is widely acclaimed in the aquarium industry as the most suitable silicon for aquarium tanks as it is not poisonous and thus, will not harm the marine life in the tank. In this case, black silicon has been chose. Black silicon is beneficial for it will not take on dye from medication and if algae collect in the corners it will not be as visible. Clear silicon is also available at your request.




Plumbing Holes – Almost all of the tanks manufactured by us have 4 machine polished holes on the top bracing, 2 holes at the front top bracing and 2 holes at the back top bracing. The holes can double-up as convenience sake when it comes to feeding small food and acts as a mean to tidy wire management such as the wire cords from wavemakers, oscillators and other types of surge devices.


OTHER SERVICES

- To supply 1 piece of 1'' foam.




-THE END-

[nosense]

by Tank Junction - 72'' x 30'' x 24'' 12mm IOS 2-tier, media, accessories






Check out the special features and exclusive ideas of TJ in this product:

MAIN TANK

Tank Specs: 2 tanks of 72'' x 30'' x 24'' with 12 mm thickness






Japan Asahi Grade 1 Glass - Nowadays, aquariums are considered as one of the most modern forms of interior décor accessory in home or workplace in order to enhance the overall aesthetic appeal. Our manufactured glass tanks boast of all round machine polish Japan Asahi Grade 1 glass to prevent cuts or injuries due to the smooth edges created by the machine polish as compared to hand chamfered tanks. Thus, a very refined and professional finishing look is guaranteed.






Perimeter Bracing – Euro Bracing Top and Bottom: Bracing for tanks on top as well as bottom. Strengthens and supports the glass of the tanks by pulling it together as pressure is always applied at the biggest surface areas which are the front and back; also not forgetting the works of gravitational pull at the bottom. Double-up as a support for glass covers and prevents fish from jumping out as well. Euro Bracing is characterized by a narrow glass strip that runs around the entire top perimeter of the tank, as well as a center glass brace that runs front to back. The braces are set inside the top and bottom edge of the tank. This thus adds stability to the tank in general.




IOS System: Right hand Side - Suction effect of this installation allows sediments at the bottom of the tank to be filtered out by flowing into the box instead of circulating in the tank.


Dow Corning silicon: Black - Dow Corning silicon is widely acclaimed in the aquarium industry as the most suitable silicon for aquarium tanks as it is not poisonous and thus, will not harm the marine life in the tank. In this case, black silicon has been chose. Black silicon is beneficial for it will not take on dye from medication and if algae collect in the corners it will not be as visible. Clear silicon is also available at your request.






Oyama pasting: Black and White for the two respective tanks(Base, Back, Right hand side, Left hand side, IOS system, 3'' front rim) - Oyama pasting is almost synonymous with a splendid looking fish tank. Oyama services are provided with a wide range of self adhesive color films available rather than the standard Black, Blue or White. Black and white Oyama has been chosen in this case. Feel free to personalize your tank with various colors of matt or gloss posters. Adding coloured film to your tank creates a decorative effect that really compliments the ambience of a room without dominating or overpowering it. We are open to any idea or design you may have in mind. We will be able to tell you if it's possible to create it, and give you a free estimate as to the fabrication cost. All with absolutely no obligation whatsoever.




Plumbing Holes – Almost all of the tanks manufactured by us have 4 machine polished holes on the top bracing, 2 holes at the front top bracing and 2 holes at the back top bracing. The holes can double-up as convenience sake when it comes to feeding small food and acts as a mean to tidy wire management such as the wire cords from wavemakers, oscillators and other types of surge devices.



To be continued...

[nosense]

Glass Covers – Our glass covers are finished with oyama trimmings with holes on top. Oyama trimmings are a safety precaution to protect you from cuts caused by the edges of glass covers. It also serves as an added resistance to breaking and chipping. The black oyama trimmings also give the tank a pleasant overall look. Holes drilled into glass covers allows better grip handle during removal of glass covers. Having glass panes reduces the level of evaporation particularly if the tank is situated in an air-conditioned room, which means you don’t need to top off the tank frequently.


Metal Stand

Metal Stand Specs: 77'' x 30'' x 43''





- 6 legged double tier with 2'' square bar.
- 3x2 pared bar top
- Galvanized steel allows for better protection and endurance


ACCESSORIES AND MEDIA



Media package: Mr Aqua 5L (x2 boxes), Bactertia House 12pcs (x2 boxes), Volcano Rocks (1kg), Coral Chip (1kg), Jap Matt, Cotton Wool (x1 bag). Whole set x2




Accessories: Eheim 1262 Water Pump + union + on/off valve + piping. Whole set x2. Small Boy Air Pump, air disc, y-valve split, black tube. Whole set x2

Extensions: 5 way extensions (2 pcs)



Lighting - Hopar T5 lighting 5ft: Customer chose 1 set of 4 white and 1 set of 2 red and 2 white. Other colours available as well.





-THE END-

[nosense]

by Tank Junction - 60'' x 24'' x 24'' 12mm cab sump + full siliconless piping






Check out the special features and exclusive ideas of TJ in this product:

MAIN TANK

Tank Specs: 60'' x 24'' x 24'' with 12 mm thickness





Japan Asahi Grade 1 Glass - Nowadays, aquariums are considered as one of the most modern forms of interior décor accessory in home or workplace in order to enhance the overall aesthetic appeal. Our manufactured glass tanks boast of all round machine polish Japan Asahi Grade 1 glass to prevent cuts or injuries due to the smooth edges created by the machine polish as compared to hand chamfered tanks. Thus, a very refined and professional finishing look is guaranteed.




Perimeter Bracing – Euro Bracing Top and Bottom: Bracing for tanks on top as well as bottom. Strengthens and supports the glass of the tanks by pulling it together as pressure is always applied at the biggest surface areas which are the front and back; also not forgetting the works of gravitational pull at the bottom. Double-up as a support for glass covers and prevents fish from jumping out as well. Euro Bracing is characterized by a narrow glass strip that runs around the entire top perimeter of the tank, as well as a center glass brace that runs front to back. The braces are set inside the top and bottom edge of the tank. This thus adds stability to the tank in general.




Overflow box: Triangular Right hand Side - Suction effect of this installation allows sediments at the bottom of the tank to be filtered out by flowing into the box instead of circulating in the tank. Over-flow box act as surface skimmer for suspended particles. Our overflows are constructed out of glass with acrylic overlay. The tank’s cleanliness can thus be maintained fuss-free. We also have our very own exclusive laser cut acrylic comb for the filter. This comb is unlike the others found in the market, boasting better flexibility but at the same time, very durable.


Dow Corning silicon: Black - Dow Corning silicon is widely acclaimed in the aquarium industry as the most suitable silicon for aquarium tanks as it is not poisonous and thus, will not harm the marine life in the tank. In this case, black silicon has been chose. Black silicon is beneficial for it will not take on dye from medication and if algae collect in the corners it will not be as visible. Clear silicon is also available at your request.




Oyama pasting: White (Base, Back, Overflow) - Oyama pasting is almost synonymous with a splendid looking fish tank. Oyama services are provided with a wide range of self adhesive color films available rather than the standard Black, Blue or White. White Oyama has been chosen in this case. Feel free to personalize your tank with various colors of matt or gloss posters. Adding coloured film to your tank creates a decorative effect that really compliments the ambience of a room without dominating or overpowering it. We are open to any idea or design you may have in mind. We will be able to tell you if it's possible to create it, and give you a free estimate as to the fabrication cost. All with absolutely no obligation whatsoever.




Plumbing Holes – Almost all of the tanks manufactured by us have 4 machine polished holes on the top bracing, 2 holes at the front top bracing and 2 holes at the back top bracing. The holes can double-up as convenience sake when it comes to feeding small food and acts as a mean to tidy wire management such as the wire cords from wavemakers, oscillators and other types of surge devices.




Glass Covers – Our glass covers are finished with oyama trimmings with holes on top. Oyama trimmings are a safety precaution to protect you from cuts caused by the edges of glass covers. It also serves as an added resistance to breaking and chipping. The black oyama trimmings also give the tank a pleasant overall look. Holes drilled into glass covers allows better grip handle during removal of glass covers. Having glass panes reduces the level of evaporation particularly if the tank is situated in an air-conditioned room, which means you don’t need to top off the tank frequently.


To be continued...

[nosense]

CABINET

Cabinet Specs: 60" x 24" cabinet with kapor structure



Choice of wood for Cabinet: Kapor - Kapor solid structured wood cabinet was chosen by our customer in this case. We do have Chengal available as well. Both are naturally durable, containing substances which repel wood-destroying agents and fungal infestation. They can safely be used without preservative treatment in all climates. These two types of timber are water-resistant. Due to its hardy and solid nature, Kapur and Chengal enable support for heavy tanks.





Louver Doors and Removable Center Structure - One popular key feature of our TJ cabinets are our 45 degree cutting downwards sloping at the top of doors, which allows minimal effort when opening the cabinet. As such, we do not need to open the doors using the conventional way of bending all the way down to open the doors from below, enhancing convenience. Our doors come with ABS trimmings. This ensure that the doors are waterproof, increasing protection of the doors. Louvers on the doors allow better ventilation as the electrical equipment such as pumps in the sump tank generates heat. Louvers enable the hot air to steam out and are thus highly recommended. The removal centre structure acts as a pivot to provide better stability and ease of removal of sump tanks.






Lamination: 3 way lamination (EFL 2748G cool black (Main) and EWO 4403E zebra wood (doors) by EDL) - we have 3-way lamination or 4-way lamination with many colors of the Formica to choose from. As the picture shows, we even line up the surface area of the holes with Formica paper for a neater look as well as better comfort. This is another trademark feature of TJ cabinets.




Hood and Borders - The L-shape and straight borders cover up the sides of the tank, giving it a full height cabinet look. The hood covers up the lights of the tank.



SUMP TANK

Sump Tank Specs: 36'' x 18'' x 18/16’’ 6mm





Main Sump Tank: sloping and wet - we also have straight sump tank as well as dry sump tank available.

Sump tank covers - Sump tank covers are provided to prevent water from splashing out and affecting the interior of the cabinet. We have installed 2 long strips along the last 3 compartments of the sump tank to allow the placing of the acrylic tank covers.


Full siliconless piping - Piping can be used for immediate submersion into the water as there will no acrylic or poisonous smell affecting the water. Our sump tanks use a special mould casket instead.


ACCESSORIES AND MEDIA

Accessories and full media package: Economical full media package and setup (Mr Aqua package). Includes Mr Aqua Ceramic Rings(3 boxes), Bio-ball (200pcs), Coral Chip(1kg), Bacteria House (30pcs), Cotton wool(1 pack), Jap Matt (2 pc) Laundry bag and Volcano rock(1kg). Additional accessories includes the Eheim 1264 pump and SICCE N-4 Wave Maker.


Lighting - Hopar T5 lighting 5ft: Customer chose 4 pieces of white and 4 pieces of red. Other colours available as well.




-THE END-

[nosense]

by Tank Junction - new piping for 4x2x2 cab sump + supply of eheim 1262


Other Services
- supplying Eheim 1262 water pump
- providing piping services







-THE END-