|
17-07-2016, 02:05 PM | #1 |
New Member
Join Date: Jul 2016
Posts: 21
|
First attempt at CRS tank
Finally decided to take the plunge and setup a crs tank.
Eheim 2213 Hailea 28A Gush Crystal Garden 60M Aqualighter 2 60CM Benibachi Mineral Soil Gush oPipe & gPipe Using Benibachi mineral powder and Mosura BT-9 with benibachi active water. Day 1 - 09 July 2016 Tank set up: Day 5 - 13 July 2016 Attack of the tannins Dropped a packet of purigen to clear some of the tannins. Day 6 - 15 July 2016 Glosso is growing in the tank. Day 7 - 16 July 2016 Measured the water parameters PH - 6.5 Ammonia - 10 ppm Nitrite - 1.0 ppm Nitrate - 10 ppm Tank temperature - 26 degrees Seems like cycling has not started yet. Last edited by leezhengxi; 17-07-2016 at 09:55 PM. |
17-07-2016, 03:59 PM | #2 |
Moderator
Join Date: Nov 2008
Posts: 6,727
|
Maybe you can use photobucket, or flickr to upload your photos
__________________
花有重开日,人无再少年 |
18-07-2016, 09:25 AM | #3 |
New Member
Join Date: Jun 2014
Posts: 29
|
You may want to consider raising the temp for cycling purpose. Did you on your chiller? And adding purigen may hinder cycling process since it will also absorb elements needed for cycling. Just my 2c
Sent from my ONE A2003 using Tapatalk |
18-07-2016, 11:48 AM | #4 | |
New Member
Join Date: Jul 2016
Posts: 21
|
Quote:
Hmm, in that case I will off the chiller. Is it advisable if I do a 50% wc to clear the tannins |
|
19-07-2016, 01:56 PM | #5 |
Endangered Dragon
Join Date: Jun 2007
Posts: 11,159
|
|
20-07-2016, 07:05 PM | #6 |
New Member
Join Date: Jul 2016
Posts: 21
|
Took another reading today.
Day 12 Ammonia: 10ppm Nitrite: 0ppm Nitrate: 0ppm Currently the tank water is cloudy, so I assume it's a bacterial boom but there isn't any nitrite or nitrate reading. From the looks, seems like the tank have not started to cycle yet. Everyday just sit and watch the plants grow for now. i.imgur.c0m/Ve78e0x.jpg |
23-07-2016, 03:57 PM | #7 |
New Member
Join Date: Apr 2016
Posts: 11
|
Nice tank. When it fully growth it will be idea place for shrimps.
You may use Crystal Clear to remove the cloudiness. Dont over dose. |
25-07-2016, 12:14 AM | #8 | |
New Member
Join Date: Jul 2016
Posts: 21
|
Quote:
Already did twice 70-80% water change, but ammonia level still remains at 8ppm. It is quite puzzling to me as the ammonia level did not decrease even after massive water changes. I'm thinking if my ammonia is super sky high till I need to do like 50% wc daily to bring it down to at least 4ppm. |
|
31-07-2016, 10:30 PM | #9 |
New Member
Join Date: Jul 2016
Posts: 21
|
Over the weekend, I changed filter to eheim 2217 and added a sunsun prefilter to ease my maintenance next time.
Did a 80% WC at the same time after which, I noticed my glosso start pearling. hxxp://i.imgur.c0m/7dGkSq2.jpg |
02-08-2016, 12:24 AM | #10 |
Endangered Dragon
Join Date: Jun 2007
Posts: 11,159
|
So your water cycled now?
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|