How to chemical clean - Aircon/chiller

BarraCuda™ · 07-01-2005, 03:34 PM

First of all you will need these tools.

CX -448 coil cleaner
This is a alkaline based coil cleaner. Once sprayed on aluminium or copper, it will start to foam and give off heat. The chemical reaction will loosen baked on dirt on the condensor coil

BarraCuda™ · 07-01-2005, 03:36 PM

Evaporator coil cleaner
This is the safer but much more expensive used mainly for indoor aircon fan unit. Once sprayed, the foam will slowly work its way down the coil and eventually turn to liquid. No rinsing required.

BarraCuda™ · 07-01-2005, 03:38 PM

Fin Brush
This brush is specially made for brushing coils, its stiff yet flexible enough not to damage the coil fins.

Fin Comb
This comb is for straightening bent fins back into shape. The coil fins if bent, it reduce airflow thus reducing efficiency.

BarraCuda™ · 07-01-2005, 03:40 PM

High pressure spray
You need this to clean off the CX448 after 10-15mins

BarraCuda™ · 07-01-2005, 03:48 PM

This is the condensor coil, I'm going to clean today. Its already been dry cleaned by brushing and the bulk of the dirt is already removed.

I did not take photos of the chemical reaction since I'm working alone today but I'm going to describe what will happen.

Even with brushing, dirt will still coat the condensor fins thus you need the help of CX-448.

Once CX-448 were sprayed on the condensor coil, it will start to foam after abt 30secs. White foam will turn to yellow as the dirt are being removed, heat will also be given out. Allow abt 10-15mins for reaction and rinse off with freshwater. For my case, I allowed only 5mins (first time doing

) before rinsing off.

BarraCuda™ · 07-01-2005, 03:52 PM

This is the coil after cleaning! much cleaner and shiny!

Chemical cleaning should be done once or twice annually to keep yr aircon/chiller working at top efficieny. Dirty coils will increase power consumption by abt 10-20%.

So why pay $150+ or more for chemical clean when you can DIY?

07-01-2005, 03:58 PM

Quote:

Originally Posted by BarraCuda™

This is the condensor coil, I'm going to clean today. Its already been dry cleaned by brushing and the bulk of the dirt is already removed.

I did not take photos of the chemical reaction since I'm working alone today but I'm going to describe what will happen.

Even with brushing, dirt will still coat the condensor fins thus you need the help of CX-448.

Once CX-448 were sprayed on the condensor coil, it will start to foam after abt 30secs. White foam will turn to yellow as the dirt are being removed, heat will also be given out. Allow abt 10-15mins for reaction and rinse off with freshwater. For my case, I allowed only 5mins (first time doing

) before rinsing off.

Bro u take out ur whole aircon compressor?

BarraCuda™ · 07-01-2005, 04:02 PM

Quote:

Originally Posted by monsterz1975

Bro u take out ur whole aircon compressor?

No lah, I removed the protective fin guard only

07-01-2005, 05:44 PM

Quote:

Originally Posted by BarraCuda™

No lah, I removed the protective fin guard only

IC .........

BarraCuda™ · 12-02-2005, 01:34 AM

Ah ha .. finally found time to do a chemical clean on my diy chiller!

Fully clogged with dirt and fur from my rabbit.... 3 months of abuse

07-01-2005, 03:34 PM	#1
BarraCuda™ SiaoGu Gives You Wings Join Date: Jul 2001 Posts: 4,169	How to chemical clean - Aircon/chiller First of all you will need these tools. CX -448 coil cleaner This is a alkaline based coil cleaner. Once sprayed on aluminium or copper, it will start to foam and give off heat. The chemical reaction will loosen baked on dirt on the condensor coil

07-01-2005, 03:36 PM	#2
BarraCuda™ SiaoGu Gives You Wings Join Date: Jul 2001 Posts: 4,169	Evaporator coil cleaner This is the safer but much more expensive used mainly for indoor aircon fan unit. Once sprayed, the foam will slowly work its way down the coil and eventually turn to liquid. No rinsing required.

07-01-2005, 03:38 PM	#3
BarraCuda™ SiaoGu Gives You Wings Join Date: Jul 2001 Posts: 4,169	Fin Brush This brush is specially made for brushing coils, its stiff yet flexible enough not to damage the coil fins. Fin Comb This comb is for straightening bent fins back into shape. The coil fins if bent, it reduce airflow thus reducing efficiency.

07-01-2005, 03:40 PM	#4
BarraCuda™ SiaoGu Gives You Wings Join Date: Jul 2001 Posts: 4,169	High pressure spray You need this to clean off the CX448 after 10-15mins

07-01-2005, 03:48 PM	#5
BarraCuda™ SiaoGu Gives You Wings Join Date: Jul 2001 Posts: 4,169	This is the condensor coil, I'm going to clean today. Its already been dry cleaned by brushing and the bulk of the dirt is already removed. I did not take photos of the chemical reaction since I'm working alone today but I'm going to describe what will happen. Even with brushing, dirt will still coat the condensor fins thus you need the help of CX-448. Once CX-448 were sprayed on the condensor coil, it will start to foam after abt 30secs. White foam will turn to yellow as the dirt are being removed, heat will also be given out. Allow abt 10-15mins for reaction and rinse off with freshwater. For my case, I allowed only 5mins (first time doing ) before rinsing off.

07-01-2005, 03:52 PM	#6
BarraCuda™ SiaoGu Gives You Wings Join Date: Jul 2001 Posts: 4,169	This is the coil after cleaning! much cleaner and shiny! Chemical cleaning should be done once or twice annually to keep yr aircon/chiller working at top efficieny. Dirty coils will increase power consumption by abt 10-20%. So why pay $150+ or more for chemical clean when you can DIY?

12-02-2005, 01:34 AM	#10
BarraCuda™ SiaoGu Gives You Wings Join Date: Jul 2001 Posts: 4,169	Ah ha .. finally found time to do a chemical clean on my diy chiller! Fully clogged with dirt and fur from my rabbit.... 3 months of abuse

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)