Sander Certizon 100 Ozonizer

Originally Posted by nim75sg

The ORP Controller shouldn't vibrate or emit any noise with different setpoints ie whether 250, 300, 350 or whatever.

Let me try to help...

1) What brand of Ozonizer and Controller are you using?
2) Where do you place the Controller? (If it leans against the sump then probably the noise comes from the virbration of the return pump)
3) Is the ORP controller light "flashing"?
4) How are the connections of the Ozonizer and Controller?



There should be some reading at the display panel of the ORP controller, if not then something is kaput with either the controller or the probe.

If you need help realtime ... pm me your contact details

thanks for the prompt reply, have PMed u liao, sadly me not at home, really want to know what happen, so sad tat i cannot run the ozone..


1) What brand of Ozonizer and Controller are you using?
The enaly and milwaukee orp controller

2) Where do you place the Controller? (If it leans against the sump then probably the noise comes from the virbration of the return pump)

it lean at the cabinet door, nothing is virbrating there


3) Is the ORP controller light "flashing"?
not flashing it is red all the way. When i touch the probe which is attached to the controller, the light will flash and virbrating stop


4) How are the connections of the Ozonizer and Controller?
Henry have tell me abt the connection and i think should not be wrong.


Is it possible tat the orp probe is spolit???


thanks a lot once again

When the ORP controller is powered up without the probe then the "red" light should flash one and then goes off.

Also, there should be some reading displayed.

Anyway, here is the connection:

1) Attach probe to BNC connect of the Controller and set your threshold to your requirements.
2) AC/DC adapter to input jack of Milwaukee Controller
3) Power Connector from the Milwaukee connect to a power socket.
4) Insert the power plug of the Ozonizer to the power connector of Milwaukee
5) Power up the AC/DC adapter as well as the Ozonizer.

Take note that the red light should flash intermittently upon power up and then swtches itself off when the setpoint is reached.

To determine this capability, set the 250 mV as the threshold, before settingl the desired mV.

Have fun ..

Originally Posted by nim75sg

When the ORP controller is powered up without the probe then the "red" light should flash one and then goes off.

Also, there should be some reading displayed.

Anyway, here is the connection:

1) Attach probe to BNC connect of the Controller and set your threshold to your requirements.
2) AC/DC adapter to input jack of Milwaukee Controller
3) Power Connector from the Milwaukee connect to a power socket.
4) Insert the power plug of the Ozonizer to the power connector of Milwaukee
5) Power up the AC/DC adapter as well as the Ozonizer.

Take note that the red light should flash intermittently upon power up and then swtches itself off when the setpoint is reached.

To determine this capability, set the 250 mV as the threshold, before settingl the desired mV.

Have fun ..

thanks a lot bro, it work liao, no more buzzing sound..

sorry for the troubled caused, think it is more of the orp probe not tighten e nuff.

u are very very helpful and hopefuly i can paid u a visit to view ur tank

Originally Posted by iori_del

thanks a lot bro, it work liao, no more buzzing sound..

sorry for the troubled caused, think it is more of the orp probe not tighten e nuff.

u are very very helpful and hopefuly i can paid u a visit to view ur tank

Ya..Bro Nim75sg is known to be very helpful especially to Aroreefer . But you have to indicate to Nim75sg which tank you want to view..

Have fun with your ORP...I am also running it..so far so good.

Originally Posted by wlchew

Ya..Bro Nim75sg is known to be very helpful especially to Aroreefer . But you have to indicate to Nim75sg which tank you want to view..

Have fun with your ORP...I am also running it..so far so good.

yup he is very very helpful and friendly, woh so many tank huh> will it be bigger than underwater world??

wun choose to view just hope that he can give some free entry ticket..

Originally Posted by wlchew

Ya..Bro Nim75sg is known to be very helpful especially to Aroreefer . But you have to indicate to Nim75sg which tank you want to view..

Have fun with your ORP...I am also running it..so far so good.

Yes u guys r really great , always been so helpfull. Cheer bros.

Me helpful? ....

Only when someone promises me a Teh Tarik or Kopi-O Light

Originally Posted by nim75sg

Me helpful? ....

Only when someone promises me a Teh Tarik or Kopi-O Light

Ken u r not that kind of person leh.

Originally Posted by monsterz1975

Ken u r not that kind of person leh.

Bro, I say-say only hor ...don't take it too SERIOUS!?!