|
18-07-2009, 11:58 PM | #1 |
Guest
Posts: n/a
|
some advice for boyu ef05
hey, currently comparing eden 501 and boyu ef05. obviosuly after reading eden would win for performance. but however i got budget. trying not to exceed thus tot of trying boyu ef05. however today i realised that these canister mus put on the same height. so would like to ask bro/sis here if you have used b4. can tell me hows the flowrate like? easy to maintain? ani good and bad points for it.
btw am using a 5plan M size tank 12inch, 7inch, 9inch i tnk the dimension. housing 5 baby angel and one sae one otto one zebrasnail and one pleco. |
19-07-2009, 05:45 PM | #2 |
Guest
Posts: n/a
|
oh and if lets say i change to boyu ef05 rite? the media how? as in. becoz in my old hof i have put some cr and bh. but definately not enuff to fill the boyuef05. so may i noe whats the way to like mk sure the boyu that i wil be hanging on the media is like 'cycled' so that the water will be ok? hahaha dun really noe how to phrase it.
|
19-07-2009, 06:09 PM | #3 |
Senior Dragon
Join Date: Jun 2006
Posts: 3,832
|
use b4 always need to flush the rubber hose often as they get clog with the silmy stuff.
if chose tis or hof i did go fr a hof instead. |
19-07-2009, 06:13 PM | #4 |
Guest
Posts: n/a
|
I used this one before...
Actually I find that it has quite alot of space (for me) to put media in. But what I dont like is that the hose will have dirt inside very fast. Might be due to the low flowrate. And the flowrate actually reduces very fast over time. I noticed my flowrate seems to be dipping after using it for only 3 weeks. And the hose is extremely difficult to wash as well. So it was either wash the hose, or get a new hose. I'm not sure if the Eden501 would give similar problems as they have about the same design... |
19-07-2009, 09:19 PM | #5 | ||
Guest
Posts: n/a
|
Quote:
Quote:
and what way u use to clear the hose? can the hose be bought outside?? tink its all of these small canister got this prob ba. |
||
19-07-2009, 09:33 PM | #6 |
Guest
Posts: n/a
|
what abt using ef10? where flowrate much stronger? anione noes how much it is?
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|